Overwhelmed by the Complexity of Jobs? This May Help

What You Should Know About Hay Bailing During the winter season, it is wise that you have a large supply of hay for your livestock since it is considered as their staple food. It is great concern that most of the farmers face hardships in the storing of hay. Bailing of hay is considered as the best method when it comes to storing of hay. There is an expanded market for drive tractors due to the increased demand for hay. Nevertheless, it is not an easy task for an inexperienced farmer. The right weather conditions is also a key factor to consider. The following are some simple steps to follow in the bailing process. It is irrespective to know that the grass in your farm is ready for bailing.When the grass has reached its growth peak; it is important to mow it.Curing is the next process that takes place on the grass after it has been cut. Curing depends on some factors including the weather conditions present at that time and the estimated weight of the grass. The raking using a hay rake should also follow.Primarily, a farmer will end up with either one or two rows of the grass that are folded together. Next, a farmer is supposed to attach the baler to the tractor.A farmer is also supposed to check whether the belts are fixed in the right way. You are then required to load the bale twine on the tractor.Holding the hay close together is the job of the bale twine. You should then check the readiness of the windrowed hay to be bailed.Wet clamps should not be present in the windrowed hay. A crispy feel of the hay shows that it is ready for the bailing process. The tractor should then proceed down to the row after centering it over the windrow. It is recommended that if hay is not reaching the entry chamber, one should try weaving forward and backward. During the bailing process, it is wise that you keep your eye on the indicator lights. It helps you know when each bale is complete so as you can advance to the tying process. A farmer should also back up the tractor with a bit. It is the place where the bale drops after the bailing process. These steps should be followed as indicated above. Repeatedly continue with the process for the rest of the field. Hay usually cause clogging of the baler at times. However, you should not worry as long as the system you are using has safety chocks. For your hay to sell, bailing is a very crucial step and should be done in the right way for positive results. It is wise to follow the above steps for a positive result.Questions About Resources You Must Know the Answers To

What I Can Teach You About Jobs